Training Courses

Ikon offers a full range of courses to help you get the most from our solutions as well as theory courses to help you improve your skills.

UK and Europe
UK and Europe Training
We regret to inform that due to the Coronavirus (Covid-19), all upcoming courses are being postponed until further notice. We apologize for any inconvenience. If you have questions please reach out to Training@IkonScience.com.

 

Based at our headquarters in Surbiton, SW London, our Training Center offers computer facilities for classes of up to 8 attendees, and theory based courses (without computers) for up to 16. It is also available for hire by individual companies for private presentations of the Ikon Science software or geoscience courses.

All courses run from 9am-5pm, possibly finishing earlier on the final day, and all training material is supplied. The training center opens at 8:45 am, and breakfast is served. Lunch is provided and refreshments are available throughout the day.

Special requirements and H&S

For H&S reasons you will be required to sign in at reception upon arrival/departure. Please advise us if you require wheelchair access, or if you have any dietary requirements.

surbiton building

Training center address:

1st Floor, 1 The Crescent, Surbiton, London, KT6 4BN - Directions

Upcoming Courses
RokDoc SDC & Inversion - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
21 Apr - 23 Apr 2020
Instructor: Andrey Kozhenkov - Geoscience
Cost per place: 1575.00 Excl. TAX

Attendees learn to operate the software by applying it to practical examples; this is supplemented by presentations of the underlying principles and by discussion of the results obtained, with emphasis on QC methods.

Pressures and Overpressure in the Subsurface - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
12 May - 14 May 2020
Instructor: Ed Hoskin - Geopressure
Cost per place: 1575.00 Excl. TAX

The main objective of this 3 Day course is for attendees to learn how pressure data effects the safe and optimal exploration and exploitation of hydrocarbon reservoirs. Overpressure is found in most sedimentary basins, where reservoirs tend to be fine-grained lithologies, especially at depths >2.0km below sea-bed.

Introduction to Geomechanics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
19 May - 21 May 2020
Instructor: Randy Hickman Ph.D. - Geomechanics
Cost per place: 1575.00 Excl. TAX

This course introduces attendees to the fundamental concepts underpinning any geomechanical study such as rock properties, the relationship between stress and strain, sources of stress and the components of a full stress tensor.

RokDoc PressureView, GeoPressure Calculators & Seismic Pressure Calculator - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
02 Jun - 04 Jun 2020
Instructor: Ed Hoskin - Geopressure
Cost per place: 1575.00 Excl. TAX

This course is designed to be an introduction to PressureView, GeoPressure Calculator and Fracture Pressure Calculator modules within RokDoc. This course also introduces users to the features and functionality of Seismic Pressure Calculator.

iPoint for Data Management - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
09 Jun - 11 Jun 2020
Instructor: Steve Edmond - iPoint
Cost per place: 1575.00 Excl. TAX

Intended for Data Technicians and Data Management. Covers all aspects of System Administration including managing users and their permissions and the setting and management of data standards.

RokDoc Rock Physics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
16 Jun - 18 Jun 2020
Instructor: Ron Compton Stewart - RokDoc
Cost per place: 1575.00 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

iPoint for Geoscientists - 2 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
01 Sep - 02 Sep 2020
Instructor: Anna Brand - iPoint
Cost per place: 1050 Excl. TAX

Intended for either those who are new to iPoint, or an existing user looking to learn about the latest features and utilise some of the more advanced geoscience tools.

RokDoc 4D Reservoir Monitoring - 1.5 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
08 Sep - 09 Sep 2020
Instructor: Andrey Kozhenkov - Geoscience
Cost per place: 1050 Excl. TAX

This two day course aims to impart to the user a thorough understanding of how to use the Reservoir Monitoring functionality within RokDoc. The RokDoc Reservoir Monitoring add-on provides the tools, functionality and workflows needed for the detailed analysis of 4D seismic data. Some level of prior experience and understanding of the RokDoc Rock Physics module (RokDoc 1D2D) is assumed.

RokDoc GeoMechanics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
15 Sep - 17 Sep 2020
Instructor: Yoryenys Del Moro - Geomechanics
Cost per place: 1575 Excl. TAX

This course introduces RokDoc GeoMechanics and Image Logs functionality, as well as a brief introduction to PressureView.

RokDoc Ji-Fi - 2 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
22 Sep - 23 Sep 2020
Instructor: Ana Somoza - Geoscience
Cost per place: 1890 Excl. TAX

RokDoc Ji-Fi (Joint Impedance & Facies Inversion) is our most innovative inversion technology. This course takes you through detailed workflows; starting from the generation of facies logs, through to running the inversion and QC of the results, so you fully cover all its extensive capabilities. As well as learning how to drive the software, all relevant underlying principles are discussed, and results reviewed.

RokDoc Rock Physics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
06 Oct - 08 Oct 2020
Instructor: Ron Compton Stewart - RokDoc
Cost per place: 1575 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

Introduction to Geomechanics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
13 Oct - 15 Oct 2020
Instructor: Randy Hickman Ph.D. - Geomechanics
Cost per place: 1575.00 Excl. TAX

This course introduces attendees to the fundamental concepts underpinning any geomechanical study such as rock properties, the relationship between stress and strain, sources of stress and the components of a full stress tensor.

RokDoc SDC & Inversion - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
20 Oct - 22 Oct 2020
Instructor: Andrey Kozhenkov - Geoscience
Cost per place: 1575.00 Excl. TAX

Attendees learn to operate the software by applying it to practical examples; this is supplemented by presentations of the underlying principles and by discussion of the results obtained, with emphasis on QC methods.

RokDoc PressureView, GeoPressure Calculators & Seismic Pressure Calculator - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
27 Oct - 29 Oct 2020
Instructor: Ed Hoskin - Geopressure
Cost per place: 1575.00 Excl. TAX

This course is designed to be an introduction to PressureView, GeoPressure Calculator and Fracture Pressure Calculator modules within RokDoc. This course also introduces users to the features and functionality of Seismic Pressure Calculator.

iPoint for Data Management - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
03 Nov - 05 Nov 2020
Instructor: Steve Edmond - iPoint
Cost per place: 1575 Excl. TAX

Intended for Data Technicians and Data Management. Covers all aspects of System Administration including managing users and their permissions and the setting and management of data standards.

Pressures and Overpressure in the Subsurface - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
10 Nov - 12 Nov 2020
Instructor: Dr. Sam Green - Geopressure
Cost per place: 1575 Excl. TAX

The main objective of this 3 Day course is for attendees to learn how pressure data effects the safe and optimal exploration and exploitation of hydrocarbon reservoirs. Overpressure is found in most sedimentary basins, where reservoirs tend to be fine-grained lithologies, especially at depths >2.0km below sea-bed.

Essentials of Rock Physics and Seismic Amplitude Interpretation - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
17 Nov - 19 Nov 2020
Instructor: Dr Simon Payne - Geoscience
Cost per place: 1890 Excl. TAX

This highly acclaimed course is a must for all geoscientists wanting to understand rock physics principles, their application to amplitude interpretation (including AVO reflectivity and elastic inversion products) and how they can be applied to assess drilling risk. Dr Rob Simm of Rock Physics Associates Ltd has granted Ikon Science the rights to deliver this course by our approved tutors.

RokDoc Rock Physics - 3 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
01 Dec - 03 Dec 2020
Instructor: Ron Compton Stewart - RokDoc
Cost per place: 1575 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

RokDoc Reservoir Characterization - 2 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
08 Dec - 09 Dec 2020
Instructor: Ron Compton Stewart - RokDoc
Cost per place: 1050 Excl. TAX

Intended for intermediate RokDoc users who require an introduction to Rock Physics Model Templates and RokDoc 3D. Attendees are taken through a series of workflows illustrating the predictive power of rock physics models, before progressing to RokDoc 3D, where the user can model lithologies and fluids, manipulate seismic inversion volumes, create elastic and geological property volumes, and export them to SEG-Y.

US and South America
US and South America Training
We regret to inform that due to the Coronavirus (Covid-19), all upcoming courses are being postponed until further notice. We apologize for any inconvenience. If you have questions please reach out to Training@IkonScience.com.

 

We run our training courses at our training facility in our Houston office – 12140 Wickchester Lane, Suite 400, Houston, Texas 77079. The center opens at 8:00am with courses running from 8:30am to 5pm. All training materials, breakfast, lunch and refreshments will be provided.

Breakfast is served from 8:00am

Lunch is 12-1pm.

South America Training

The location and venues of these course vary, please check specific course entry or contact us for more information.

Course times are 9am-5pm. All training materials, breakfast, and refreshments will be provided, but please note, lunch is not included. The lunch break is 12:30-1:30pm.

Special requirements and H&S

For H&S reasons you will be required to sign in at reception upon arrival/departure. Please advise us if you require wheelchair access, or if you have any dietary requirements.

surbiton building

Training center address:

12140 Wickchester Lane, Suite 400, Houston, Texas 77079 - Directions

Upcoming Courses
RokDoc GeoMechanics - 3 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
14 Apr - 16 Apr 2020
Instructor: Randy Hickman Ph.D. - Geomechanics
Cost per place: 2900 Excl. TAX

This course introduces RokDoc GeoMechanics and Image Logs functionality, as well as a brief introduction to PressureView.

RokDoc Seismic Data Conditioning & AVO Inversion - 3 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
28 Apr - 30 Apr 2020
Instructor: Gabi D’Aubeterre - Geoscience
Cost per place: 2900 Excl. TAX

RokDoc Rock Physics - 3 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
12 May - 14 May 2020
Instructor: Jorge Fernandez - RokDoc
Cost per place: 2900 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

RokDoc Rock Physics - 3 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
15 Sep - 17 Sep 2020
Instructor: Jorge Fernandez - RokDoc
Cost per place: 2900 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

RokDoc Reservoir Characterization - 2 Day Course

Ikon Science HQ Training Center - Surbiton, London First Floor 1 The Crescent Surbiton KT6 4BN
28 Oct - 29 Oct 2020
Instructor: Andrew Snowling - Geoscience
Cost per place: 1900 Excl. TAX

Intended for intermediate RokDoc users who require an introduction to Rock Physics Model Templates and RokDoc 3D. Attendees are taken through a series of workflows illustrating the predictive power of rock physics models, before progressing to RokDoc 3D, where the user can model lithologies and fluids, manipulate seismic inversion volumes, create elastic and geological property volumes, and export them to SEG-Y.

RokDoc Rock Physics - 3 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
10 Nov - 12 Nov 2020
Instructor: Jorge Fernandez - RokDoc
Cost per place: 2900 Excl. TAX

Intended for new and intermediate users who require an introduction to RokDoc and the rock physics theories behind the software. Delegates are guided through a typical RokDoc workflow, comprising data loading and QC, predicting missing data with calibrated rock physics models, blocky modelling, log-based rock physics analysis and 2D forward modelling.

RokDoc Ji-Fi - 2 Day Course

Houston Training Center 12140 Wickchester Lane, Suite 400, Houston, Texas 77079
18 Nov - 19 Nov 2020
Instructor: Andrew Snowling - Geoscience
Cost per place: 1900 Excl. TAX

RokDoc Ji-Fi (Joint Impedance & Facies Inversion) is our most innovative inversion technology. This course takes you through detailed workflows; starting from the generation of facies logs, through to running the inversion and QC of the results, so you fully cover all its extensive capabilities. As well as learning how to drive the software, all relevant underlying principles are discussed, and results reviewed.

Canada
Canada Training
We regret to inform that due to the Coronavirus (Covid-19), all upcoming courses are being postponed until further notice. We apologize for any inconvenience. If you have questions please reach out to Training@IkonScience.com.

 

We endeavor to bring timely bespoke courses to Canada when the opportunity presents itself. Locations and tutors change depending on the course and at the moment we can only accept offline bookings or run your credit card over the telephone. Please register and we will send you an invoice for payment.

Special requirements and H&S

For H&S reasons you will be required to sign in at reception upon arrival/departure. Please advise us if you require wheelchair access, or if you have any dietary requirements.

surbiton building

Training center address:

444-5th Avenue SW, Suite 2000, Calgary, Alberta, T2P 2T8, CANADA - Directions

Upcoming Courses

No Upcoming Course Schedule.

Asia Pacific
Asia Pacific Training
We regret to inform that due to the Coronavirus (Covid-19), all upcoming courses are being postponed until further notice. We apologize for any inconvenience. If you have questions please reach out to Training@IkonScience.com.

 

Our public training courses are held at our office from 8.30am till 5.30pm.

All training materials, breakfast , and lunch will be provided. Breakfast from 8.30am till 9.00am and lunch from 12.30pm till 1.30pm.

Special requirements and H&S

For H&S reasons you will be required to register at concierge upon arrival/departure. Please advise us if you have any dietary requirements.

surbiton building

Training center address:

Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia - Directions

Upcoming Courses
Pressures and Overpressure in the Subsurface - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
08 Jun - 10 Jun 2020
Instructor: Ed Hoskin - Geopressure
Cost per place: 2900 Excl. TAX

The main objective of this 3 Day course is for attendees to learn how pressure data effects the safe and optimal exploration and exploitation of hydrocarbon reservoirs. Overpressure is found in most sedimentary basins, where reservoirs tend to be fine-grained lithologies, especially at depths >2.0km below sea-bed.

RokDoc Rock Physics - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
13 Jun - 15 Jun 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 2900 Excl. TAX

RokDoc Seismic Data Conditioning & AVO Inversion - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
15 Jun - 17 Jun 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 2900 Excl. TAX

RokDoc Reservoir Characterization - 2 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
16 Jul - 17 Jul 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 1900 Excl. TAX

Intended for intermediate RokDoc users who require an introduction to Rock Physics Model Templates and RokDoc 3D. Attendees are taken through a series of workflows illustrating the predictive power of rock physics models, before progressing to RokDoc 3D, where the user can model lithologies and fluids, manipulate seismic inversion volumes, create elastic and geological property volumes, and export them to SEG-Y.

RokDoc Seismic Data Conditioning & AVO Inversion - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
19 Oct - 21 Oct 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 2900 Excl. TAX

RokDoc Rock Physics - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
02 Nov - 04 Nov 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 2900 Excl. TAX

RokDoc Reservoir Characterization - 2 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
05 Nov - 06 Nov 2020
Instructor: Fergus Sinclair Smith - Geoscience & iPoint
Cost per place: 1900 Excl. TAX

Intended for intermediate RokDoc users who require an introduction to Rock Physics Model Templates and RokDoc 3D. Attendees are taken through a series of workflows illustrating the predictive power of rock physics models, before progressing to RokDoc 3D, where the user can model lithologies and fluids, manipulate seismic inversion volumes, create elastic and geological property volumes, and export them to SEG-Y.

Introduction to Geomechanics - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
10 Nov - 12 Nov 2020
Instructor: Dr. Scott Reynolds - Geomechanics
Cost per place: 2900 Excl. TAX

This course introduces attendees to the fundamental concepts underpinning any geomechanical study such as rock properties, the relationship between stress and strain, sources of stress and the components of a full stress tensor.

Introduction to Geomechanics - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
17 Nov - 19 Nov 2020
Instructor: Dr. Scott Reynolds - Geomechanics
Cost per place: 2900 Excl. TAX

This course introduces attendees to the fundamental concepts underpinning any geomechanical study such as rock properties, the relationship between stress and strain, sources of stress and the components of a full stress tensor.

RokDoc GeoMechanics - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
17 Nov - 19 Nov 2020
Instructor: Dr. Scott Reynolds - Geomechanics
Cost per place: 2900 Excl. TAX

This course introduces attendees to the fundamental concepts underpinning any geomechanical study such as rock properties, the relationship between stress and strain, sources of stress and the components of a full stress tensor.

Essentials of Rock Physics and Seismic Amplitude Interpretation - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
24 Nov - 26 Nov 2020
Instructor: Dr. Jeremy Neep - Geoscience
Cost per place: 3900 Excl. TAX

This highly acclaimed course is a must for all geoscientists wanting to understand rock physics principles, their application to amplitude interpretation (including AVO reflectivity and elastic inversion products) and how they can be applied to assess drilling risk. Dr Rob Simm of Rock Physics Associates Ltd has granted Ikon Science the rights to deliver this course by our approved instructors.

Pressures and Overpressure in the Subsurface - 3 Day Course

Ikon Science Malaysia Sdn Bhd Level 16, Tower 2, Etiqa Twins, 11 Jalan Pinang, 50450, Kuala Lumpur, Malaysia
01 Dec - 03 Dec 2020
Instructor: Dr. Sam Green - Geopressure
Cost per place: 2900 Excl. TAX

The main objective of this 3 Day course is for attendees to learn how pressure data effects the safe and optimal exploration and exploitation of hydrocarbon reservoirs. Overpressure is found in most sedimentary basins, where reservoirs tend to be fine-grained lithologies, especially at depths >2.0km below sea-bed.

Third Party

Occasionally Ikon Science supports training classes run by third parties by allowing them to advertise on the Ikon Science website. Ikon Science makes no representations or warranties of any kind, express or implied, as to the accuracy, reliability, fitness for purpose, merchantability or non-infringement of the content of any third party courses advertised on the Ikon Science website. Ikon Science do not take payment or benefit commercially. Ikon Science terms and conditions do not apply.

Upcoming Courses

No Upcoming Course Schedule.

Testimonials

By submitting this form, you are consenting to receive marketing emails from: Ikon Science, 1 The Crescent, Surbiton, Greater London, KT6 4BN United Kingdom, http://www.ikonscience.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe SafeUnsubscribe® link, found at the bottom of every email.